Table 2 lists the inflow conditions for the nozzle or plenum conditions.
Table 2. Nozzle inflow conditions.
1. Start UPMS type upms at command prompt
and hit RETURN (If this does not work, check path or consult your system
administrator). After few seconds UPMS will start and presents a single
comprehensive view of modeling and simulation process
2. Next step is to select directory in which grid file resides. To do this, from File pull down menu click Preferences and select Working Directory.
Note: Unless, it is specifically mentioned, for selection and accepting (e.g. click OK), use always LEFT button of Mouse.
User can navigate (from Look in) to select the working directory. It is important to note that when user selects a particular directory, it gets highlighted. Now user must click Select button; otherwise the desired directory will not be selected (double click will not work).
To Preview exist project for this case, File -> Load Project, this will promt for Project Name. Type Axi for project Name. Before going further, it is useful to see the image of geometry. Clicking Active Display check box in Tools pull down menu can do it. A warning message pops up, notifying USER that it is not possible to use New, Load or Import from File menu. Click Yes to continue. After few seconds, image will appear on left panel of UPMS window
